Brands by Glen Dimplex Australia

Glen Dimplex Australia proudly supports the activities of Landcare Australia through it's membership of the AHHA

Glen Dimplex Australia | 5-7 Duncan Road, Dry Creek, South Australia 5094

Tel:  1300 554 155 | Fax: 1800 058 900

© 2018 - All rights reserved by Glen Dimplex Austalia Pty Ltd 

Privacy Policy

B5 Series 

Blaze B520

Blaze Inbuilt range is designed to be installed into either a full masonry cavity or with optional zero clearance Kit. Easy to use features and simple design fits well in any living space. 3 Speed Remote Control fan comes standard. 

Efficiency

Coverage

Emissions

1.3

140-180

sq mt

Peak

77%

g/kg

Black Nickel Plated Handle
Heater Exchange Fins 
B520 Weight 125kg
Firebrick internal lining
3 speed remote control fan.
6mm steel construction

Blaze B520 Dimensions & Clearances 

The dimensions shown in the B520 Clearances represent the minimum clearance to combustible materials refer to AS/NZS 2918 
Inbuilt Specifications

Blaze B520 Hearth

The dimensions given in the installation diagram are the minimum required for the floor protector. It may be desirable, eg for aesthetic reasons for the floor protector to be larger than these minimum dimensions. If the appliance is installed above 250mm from the floor line then the floor protector shall be constructed of 7.5mm minimum thick fibre cement sheet and 300mm from the door opening.  If the appliance is installed below 250mm from the floor line then the floor protector shall be constructed of either (A) 15mm min thickness fibre cement and 400mm from the door opening or (B) 115mm Brick and 300mm from door opening. 

It may not be laid directly on a combustible floor.
For more details and variations on floor protectors refer to AS/NZS 2918:2001 Clause 2.2, 3.3.1 and 3.3.2

Overall average efficiency burning hardwood is 65% as tested by
Adelaide Heating Technology
B520 DOWNLOADS

Blaze B520 Mantelpiece Clearance

If installing the appliance with a mantelpiece, then it should be noted a distance of 1080mm from floor line to the mantelpiece is required. The appliance may be installed 400mm from the mantelpiece when a Blaze Mantel Shield is purchased and used.

Installation

Operating

Brochure